Wolf SDC-15 Specifiche Pagina 54
- Pagina / 78
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Off
2.5%
5%
Custom
Left
Right
Top
Bottom
Auto
Off
Standard
Enhanced
Super White
Auto
YCbCr (4:4:4)
YCbCr (4:2:2)
RGB
This hides the upper, lower, left and right borders of the screen with a black mask. Can be individually adjusted
vertically and horizontally. Adjust to your preference.
Setting: Off, 2.5%, 5%, Custom [Off]
Not masked.
Compared with the original video image, approximately 2.5% around the image may be masked.
Compared with the original video image, approximately 5% around the image may be masked.
Compared with the original video image, approximately 5% of the image is masked on the left side.
Settings: 0 ~ 5% [0]
Compared with the original video image, approximately 5% of the image is masked on the right side.
Settings: 0 ~ 5% [0]
Compared with the original video image, approximately 5% of the image is masked at the upper side.
Settings: 0 ~ 5% [0]
Compared with the original video image, approximately 5% of the image is masked at the bottom side.
Settings: 0 ~ 5% [0]
Interlaced signals (480i/576i/1080i) are converted to progressive signals. Interpolates interlaced signal video images
with video images from the surrounding fields. Please set to your preference.
Settings: Auto, Off [Auto]
This detects 24p video content, as seen in film. This also detects interlaced signals from the original video material
or if they are the product of signal conversion and are interpolated accordingly.
The interpolation of video images as interlaced video signals, e.g. video material.
Sets the dynamic range of the input video images (scale). Dark and bright areas, which are not matched correctly,
might get brighter or darker. If you are unsure of the input signal dynamic range, please review “Level Check”.
Settings: Standard, Enhance, Super White [Standard]
This is most commonly used when the input signal is standard video, and the resulting dynamic range levels fall
between 16-235.
This is where the dynamic range of the input video will scale from 0-255, as typically seen with PC signals.
This is set when the dynamic range of the input video scales from 16-255.Please set the output to video equipment
compatible with Super White for Super White-enabled DVD / BD etc.
You can confirm the dynamic range of the input signal. A pattern as shown in the illustration is displayed in the four corners
and center of the screen. Please compare the dynamic range of the input signal with this pattern illustration and confirm.
(*) The number in the illustration is the scale level. This number is not displayed. The illustration of the gradation in the figure
is accentuated for explanatory purposes. It may be different from the actual scale level.
Adjust the color space of the input signal.
Settings: Auto, YCbCr(4:4:4),YCbCr(4:2:2), RGB [Auto]
YCbCr(4:4:4), YCbCr(4:2:2), RGB signals are automatically detected and configured.
Settings if the input of a YCbCr(4:4:4) input video image signal is detected.
Settings if the input of a YCbCr(4:2:2) input video image signal is detected.
Default setting when RGB video signals input are detected.
Configured communication of HDMI equipment.
Settings: On, Off [Off]
53
SDC-15
Mask
Progressive
Input
Level Check
Color Space
Control with HDMI
2-1 HDMI
- SDC-15 1080p D-ILA 3
- Exhaust Vents 4
- Air Intake Vent 4
- Contents 5
- Introduction 7
- Getting Started 9
- Products Battery 13
- Controls & Features 16
- STANDBY/ON 17
- STAND BY/ON LAMP WARNING 18
- Remote Control 21
- About Installation 22
- Extend Contract 23
- Lens movability range 24
- 4 x M5 Screws 25
- Air Inlets 25
- This Unit 26
- Making the Connection 27
- Connecting LAN Terminal 33
- 2 Connect to the power outlet 34
- HDMI 2 COMP. PC 35
- LENSLENS 36
- Screen Size 37
- Input Image 37
- PICTURE MODE 38
- Display Setup 41
- For PC signal input 42
- 1 Picture Adjust 43
- 2 Input Signal 44
- 3 Installation 45
- 5 Function 45
- Function 46
- Picture Mode 49
- Color Profile 49
- 1-1 Color 50
- 1-2 Advanced 51
- 1-2-1 Sharpness 52
- 1-2-2 Custom Gamma 52
- 1-2-3 Color Management 53
- 2-1 HDMI 54
- 2-2 COMP 55
- 3-1 Lens Control 56
- 3-2 Pixel Adjust 56
- 4 Display Setup 57
- 5-1 Network 58
- 6 Information 58
- Operation Guide 59
- Replacing the Lamp 63
- ICTURE MODE 65
- Red Lights 66
- Press for 2 seconds or more 66
- Check that the left and right 67
- Troubleshooting 68
- Error Messages 70
- RS-232C Interface 71
- Operating Command 74
- Reference Command 74
- Copyright and Caution 75
- Specifications 76
- Lens center 77
- Lamp cover 77
- Wolf Ci n ema 78
- © 2 011 Wo l f C i n e m a 78
© 2020, manymanuals.it. Tutti i diritti riservati | 0.069 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commenti su questo manuale